Optics And Laser Technology

Effect of laser cladding Ti/B4C/dr40-based composite coatings for the surface strengthening of shaft part

Author: Yu, Jinsu; Chen, Jiangyi; Ho, Hsinshen

Journal: OPTICS AND LASER TECHNOLOGY. 2023; Vol. 157, Issue , pp. -. DOI: 10.1016/j.optlastec.2022.108721

Temperature-compensated optical fiber magnetic field sensor with cascaded femtosecond laser micromachining hollow core fiber and fiber loop

Author: Wang, Xi-xin; Lv, Ri-qing; Zhao, Yong; Zhao, Jian; Lin, Zi-ting

Journal: OPTICS AND LASER TECHNOLOGY. 2023; Vol. 157, Issue , pp. -. DOI: 10.1016/j.optlastec.2022.108748

Simultaneous analysis of long-pulse laser irradiated plasma-facing materials (PFMs) microstructure and hardness by in-situ laser Opto-ultrasonic dual detection (LOUD)

Author: Sattar, Harse; Ran, Hai; Hu, Zhenlin; Guan, Feiyu; Imran, Muhammad; Guo, Lianbo; Luo, Wei; Ding, Hongbin

Journal: OPTICS AND LASER TECHNOLOGY. 2023; Vol. 157, Issue , pp. -. DOI: 10.1016/j.optlastec.2022.108741

Tribological behavior of CoCrMo artificial knee joint with symmetrically biomimetic textured surfaces on PEEK

Author: Liu, Yayun; Zhu, Qi; Wang, Chuanyang; Li, Jiaqiang

Journal: OPTICS AND LASER TECHNOLOGY. 2023; Vol. 157, Issue , pp. -. DOI: 10.1016/j.optlastec.2022.108774

Numerical simulation of thermal flow dynamics in oscillating laser welding of aluminum alloy

Author: Lu, Yang; Deng, Yuchun; Shi, Lin; Jiang, Laihege; Gao, Ming

Journal: OPTICS AND LASER TECHNOLOGY. 2023; Vol. 159, Issue , pp. -. DOI: 10.1016/j.optlastec.2022.109003

Mode-insensitive 3-dB power splitter based on multimode-interference coupler

Author: Sun, Shijie; Che, Yuanhua; Zhu, Mu; Lian, Tianhang; Sun, Xueqing; Wang, Xibin; Huang, Quandong; Zhang, Daming

Journal: OPTICS AND LASER TECHNOLOGY. 2023; Vol. 159, Issue , pp. -. DOI: 10.1016/j.optlastec.2022.109017

Flame front visualization in highly turbulent jet flames using CH3 photofragmentation laser-induced fluorescence

Author: Han, Lei; Gao, Qiang; Li, Bo; Li, Zhongshan

Journal: OPTICS AND LASER TECHNOLOGY. 2023; Vol. 159, Issue , pp. -. DOI: 10.1016/j.optlastec.2022.109014

Fast and accurate registration of large scene vehicle-borne laser point clouds based on road marking information

Author: Xu, Mengbing; Ma, Hao; Zhong, Xueting; Zhao, Qun; Chen, Siyun; Zhong, Ruofei

Journal: OPTICS AND LASER TECHNOLOGY. 2023; Vol. 159, Issue , pp. -. DOI: 10.1016/j.optlastec.2022.108950

Tuning parameters of phase retrieval algorithm for single-shot imaging based on object-modulated speckles by particle swarm optimization

Author: Hernandez-Alvarez, Cesar Arturo; Song, Lipei; Wang, Yufei; Alonso-Rasgado, Teresa; Su, Lei

Journal: OPTICS AND LASER TECHNOLOGY. 2023; Vol. 159, Issue , pp. -. DOI: 10.1016/j.optlastec.2022.109004

Review of different coupling methods with whispering gallery mode resonator cavities for sensing

Author: Zhang, Yaxun; Song, Qinghao; Zhao, Danni; Tang, Xiaoyun; Zhang, Yu; Liu, Zhihai; Yuan, Libo

Journal: OPTICS AND LASER TECHNOLOGY. 2023; Vol. 159, Issue , pp. -. DOI: 10.1016/j.optlastec.2022.108955

Cadmium oxide/TEMPO-oxidized cellulose nanocomposites produced by pulsed laser ablation in liquid environment: Synthesis, characterization, and antimicrobial activity

引用次数：31

3-Dimensional heat transfer modeling for laser powder-bed fusion additive manufacturing with volumetric heat sources based on varied thermal conductivity and absorptivity

引用次数：25

Numerical and experimental investigation into the subsequent thermal cycling during selective laser melting of multi-layer 316L stainless steel

引用次数：23

Review on thermal analysis in laser-based additive manufacturing

引用次数：20

Microstructure and wear resistance of laser cladded Ni-Cr-Co-Ti-V high-entropy alloy coating after laser remelting processing

引用次数：20

Microstructure and high temperature wear behaviour of in-situ TiC reinforced AlCoCrFeNi-based high-entropy alloy composite coatings fabricated by laser cladding

引用次数：18

Linear and nonlinear optical investigations of N:ZnO/ITO thin films system for opto-electronic functions

引用次数：17

Tunable terahertz metamaterial by using three-dimensional double split-ring resonators

引用次数：17

Functionally graded properties in directed-energy-deposition titanium parts

引用次数：16

Numerical and experimental analysis of the effect of volumetric energy absorption in powder layer on thermal-fluidic transport in selective laser melting of Ti6Al4V

引用次数：15